Thermoprobe TL1-A | Cek Ricek

Rp 12.500.000

Thermoprobe TL1-A 

Reference Thermometer for Field and Laboratory

The TL1-A is a preferred temperature instrument used by hundreds of companies in the pipeline, pharmaceutical and food industries. The TL1-A features high accuracy, repeatability and long-term stability. Different from most electronic thermometers, the “Cordless” TL1-A has no wires to get in the way or break. Battery replacement is easily done through a sealed cover. Encoded Calibration is unaffected by temperature, vibration, or battery removal.The rugged enclosure is designed to withstand use in the field, factory or lab. Through numerous distributors equipped for calibration and repair, the TL1-A can be supported in many locations throughout the world.

Speksifikasi Thermoprobe TL1-A

 Temperature:

- Accuracy +/-0.1°F (0.06°C)

        standard calibration 14°F to 320°F

- Standard 4 Point Calibration: 32°F(0°C) , 120°F(49°C),  199°F(93°C) & 300°F(149°C)

- Resolution: 0.01 Degrees

- Range:

        40°F to 400°F (-40°C to 204°C)

        Note: Standard Calibration does not provide full range accuracy

- Custom calibration points and ranges available.

        Temperature Time Constant: 6.5 seconds in circulated  water bath

        (63.2% response to temperature  change)

- Recommended Immersion Depth: 4" (11cm)

InterfaceFeatures:

     0.25" (6.4mm) character LCD

     Switchableunits °C or °F

     Resolution 0.1 or 0.01

     Low Battery & Fault Indication 

    Continuous operation or Auto Off after 20 minutes. 

    Stores and displays Average, Lowest & Highest readings. 

    Arrows indicating increasing/decreasing temperature. 

    Recommended Ambient Temperature range: 32°F to 112°F (0°C to 44°C)

Construction:  

- Stainless Steel RTD temperature sensor

        100ΩShock resistant Thin Film RTD  

        Standard 8"(20cm) or 12"(30cm) lengths

        Standard 0.25"(6.35mm) diameter with 0.188" (4.76mm) reduced tip

- Anodized Aluminum Enclosure with silicone seal and a durable polyester graphics window.

- Nominal Body Dimensions: 4.5 x 1.75 x 1.75" (11.4 x 4.4 x 4.4cm )

- Nominal Weight: 95 grams  

Battery:

    3V Duracell  DL2032 coincell

    Over 100 hours service life at 70°F (21°C)

    Operating Temperature Range -4°F to 130°F (-20°C to 54°C)

     Note: Battery may not provide adequate power if used outside operating range